ThinkPad Mini-Dock

From ThinkWiki
Jump to: navigation, search

ThinkPad Mini-Dock, Type 2878 (287810U)

This is a proprietary docking station for models with a CS00 standard docking port.

Features

Pass-through

  • 1x PS/2 (Mini-DIN 6, keyboard) port
  • 1x PS/2 (Mini-DIN 6, mouse) port
  • 4x USB 2.0 (Type-A) port2
  • 1x Modem (RJ-11) port
  • 1x Ethernet (RJ-45) port
  • 1x DVI-I (dual-link) out port
  • 1x VGA-out (DE-15) port
  • 1x Parallel (DB-25, ECP/EPP/SPP) port
  • 1x Serial (DE-9, RS-232) port
  • 1x Stereo line-in port (3.5mm, TRS)
  • 1x Proprietary floppy (17 mm) port
  • 1x DC-in (4-pin Mini-DIN lookalike) socket

Non-pass-through

  • 1x Headphone port (3.5mm, TRS)
  • 1x Proprietary key lock (secures the laptop to the dock)
  • 1x Kensington security lock slot

Resources


FOOTNOTES [Δ]
  1. This model does not support DVI pass-through.
  2. These ports are connected to a USB hub, which would mean that all 4 USB ports must not draw more than 500 mA in total (2.5 W). Be cautious when using one of these ports to charge a Palm PDA, or an Android/iOS smartphone.
Minidock.jpg

Part numbers

  • 40Y8141 (40Y8140), 13R0291 (62P4551), 67P9011 (62P4551), 92P3046 (62P4551)

DVI pass-through

LCD monitors are getting larger and higher-resolution. Currently, DVI based on 165MHz TDMS transmitters can only (officially) support 1600x1200x32 at 60Hz, which is the resolution of your average 20" non-widescreen LCD. IBM's driver support for this resolution through DVI ports on docks has been inconsistent. Also in Linux you might experience problems even with this resolution and IBM officially states that the pass-through DVI port only supports resolutions up to 1280x1024. Read our page of information on how to solve these troubles.

Please note that models with an Intel graphics chip are known to not support DVI; such examples would be the GMA 900-based T43 and R52. Most models with an ATI graphics chip on the other hand, are known to support DVI. However, not all models with an ATI graphics chip will support DVI.

Cut internal audio while using dock audio connector

The internal speaker stays on even when you put an audio jack into the port replicator speaker out connector.

To silence the internal speaker use the mute button, which mutes the speakers and internal headphone output on ThinkPads before the Lenovo *61 series. You may need to unmute the AC97/HDA mixer if your Linux distro maps the mute button to also mute the AC97/HDA mixer. Alternatively, it is possible to silence the internal speaker by using the volume down button to bring the volume to 0, without muting.

Models supporting this accessory