Installing Gentoo on a ThinkPad X1carbon
Specific installation notes for Gentoo on the ThinkPad X1.
Link to X1 main page X1 main page (with standard features list)
USB ethernet dongle U2L100P-Y1
This is the dongle that Lenovo ships with the X1. The device does not work out-of-the-box with 3.5.7-gentoo, but it is seen by dmesg as
AX88772B and by # lsusb
# lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 035: ID 17ef:6009 Lenovo ThinkPad Keyboard with TrackPoint Bus 001 Device 003: ID 147e:2020 Upek TouchChip Fingerprint Coprocessor (WBF advanced mode) Bus 001 Device 034: ID 0a5c:21e6 Broadcom Corp. BCM20702 Bluetooth 4.0 [ThinkPad] Bus 001 Device 005: ID 04f2:b315 Chicony Electronics Co., Ltd Bus 002 Device 011: ID 17ef:7203 Lenovo
# make menuconfig
and enable the following (need usbnet support):
Device Drivers ---> [*] Network device support ---> USB Network Adapters ---> <M> Multi-purpose USB Networking Framework <M> ASIX AX88xxx Based USB 2.0 Ethernet Adapters
Then # make && make modules_install
Get the driver from http://www.asix.com.tw/download.php?sub=driverdetail&PItemID=105 (need ver>=4.4.1)
Unzip, edit asix.c and add the device id 0x17ef:0x7203 if it's missing
static const struct usb_device_id products [] = { USB_DEVICE (0x04f1, 0x3008), .driver_info = (unsigned long) &ax8817x_info, }, { // Lenovo 10/100 USB_DEVICE (0x17ef, 0x7203), .driver_info = (unsigned long) &ax88772_info, }, { // ASIX AX88772B 10/100 USB_DEVICE (0x0b95, 0x772b), .driver_info = (unsigned long) &ax88772_info,
Then
make && make install modprobe asix