Installing Debian 5.0 (Lenny) on a ThinkPad X200
Contents
Installation
Windows Installer
This laptop is free from legacy devices such as CD/DVD so installation is a bit trickier than the average laptop. I first attempted to install using the Goodbye Microsoft installer from Vista. To get the menu visible in the Vista version I used I had to type this into a priviliged cmd.exe:
bcdedit.exe /timeout 5
A couple of reboots later I gave up on this method as the menu item refused to boot with the reason that it couldn't find the "\g2lbr.mbr" file, or that it might be corrupt. Before giving up I tried changing this path. This can be done by issuing:
bcdedit.exe
This will print all the boot alternatives. You'll see a long id-hash associated with the Debian Installer. Grab that and go ahead with the next:
bcdedit.exe /set {the-long-id-hash} path WHAT-YOU-BELIVE-IS-CORRECT
I tried changing this to "c:\g2lbr.mbr" as that's where the file is located, but without any luck.
USB CD
Next up.. I grabbed a legacy-device, USB DVD drive ;). Netinst went fine and after booting up the system I installed the 2.6.26 package from a USB stick and ethernet was up and running. I'm still fighting with X and wifi, so I'll update this page later.
USB Memory Stick
This is probably the smoothest way of installing. Lenny now has 2.6.26 as the installer image so ethernet works out of the box. Details on how to gett the lenny installer on a memory stick can be found here.
PXEBoot
PXEBoot is also an option, though the Debian installer uses too old a kernel to recognize any of the X200's network devices. My workaround was to PXEBoot the Debian installer using the integrated ethernet, and after boot plug directly into my cable router's USB interface. I can provide a more thorough how-to if there is a request.
Ethernet
Ethernet works after upgrading to version 2.6.26 of the Linux kernel.
[ 1.533055] eth0: (PCI Express:2.5GB/s:Width x1) 00:1f:16:06:ee:ec [ 1.533055] eth0: Intel(R) PRO/1000 Network Connection [ 1.533055] eth0: MAC: 5, PHY: 8, PBA No: 1008ff-0ff
Wireless
Still haven't got wifi to work. It should be possible to use the 2.6.26 version of the kernel together with 'iwlagn' wifi driver from:
git-clone git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/compat-wireless-2.6-old.git
The firmware can be found here:
http://intellinuxwireless.org/iwlwifi/downloads/iwlwifi-5000-ucode-5.4.A.11.tar.gz
And should be put in '/lib/firmware/'
I tried building this but it turned out to be a nasty soup of missing symbols so I continued to look for a faster fix. A while later I found that the Debian Kernel Team kindly provided an apt source with snapshots of the latest kernel, bingo!
deb http://kernel-archive.buildserver.net/debian-kernel trunk main
Unfortunatly this didn't do the trick either. I can now see the device in dmesg, and even in ifconfig, and even browse wireless networks with iwlist, but it's not usable yet, no idea why.. maybe my wpa_supplicant-fu is too weak. There is also an issue with the driver not exposing the device type correctly to the OS so programs such as NetworkManager identifies the device as a regular wired ethernet device.
Bug filed against Debian Hal package, found here.
<DEPRECATED>The problem had been fixed after Hal 0.5.11 was released, so it was just a matter of backporting those changes and the wifi card was finally detected correctly by network manager. Until a new package hits Sid you can use my packages on your own risk if you so chose.</DEPRECATED>
As of 0.5.11-4 wireless is properly detected.
Atheros Chipset
If your X200 has the Atheros wireless chipset (check with lspci), you need a different fix.
Debian lenny ships with the new nonproprietary Atheros driver ath5k enabled by default, but this driver does not yet support the card in the X200. You'll still have to use the madwifi driver, which is non-free.
Make sure you have enabled non-free repositories in /etc/apt/sources.list and apt-get install module-assistant. Run module-assistant as root, select madwifi, and compile and install it. The madwifi package should include a file /etc/modprobe.d/madwifi which prevents the ath5k module from loading, but if madwifi does not appear to work on reboot, the first thing to check is if there is a line 'blacklist ath5k' in a file within /etc/modprobe.d/.
As a side note, I could not make network-manager work properly with WPA encryption, so I switched over to wicd, which is also a funky utility, but has nonetheless worked with all encryption.
Video Card
The Intel 4500MHD needs a newer Xorg driver (v2:2.4.2-1) than available in Sid so I had to install from experimental:
$ cat /etc/apt/preferences Package: * Pin: release a=experimental Pin-Priority: 101 $ cat /etc/apt/sources.list | grep experimental deb http://ftp.port80.se/debian/ experimental main deb-src http://ftp.port80.se/debian/ experimental main $ sudo aptitude update $ sudo aptitude -t experimental install xserver-xorg-video-intel
With this in place, it's only a matter of updating Xorg to have something like this:
Section "Device"
Identifier "Configured Video Device"
Driver "intel"
EndSection
And something like this:
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Defaultdepth 24
SubSection "Display"
Modes "1280x800"
EndSubSection
EndSection
Tada... accelerated X.. although there seems to be some issue with the resolution. The right side of the desktop is a tiny bit outside of the LCD display. Haven't investigated much.
There are also two completly useless devices that causes issues with using an external monitor:
Section "Device" Identifier "Configured Video Device" Option "monitor-HDMI-1" "HDMI-1" Option "monitor-HDMI-2" "HDMI-2" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Monitor" Identifier "HDMI-1" Option "Ignore" "True" EndSection Section "Monitor" Identifier "HDMI-2" Option "Ignore" "True" EndSection
Trackpoint
The integrated orgasmic educator works out of the box.
[ 8.516313] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 8.536456] input: TPPS/2 IBM TrackPoint as /class/input/input9
See How to configure the TrackPoint for further tweaks.
Web Camera
The built-in webcam works out of the box.
[ 8.004081] uvcvideo: Found UVC 1.00 device <unnamed> (17ef:480c) [ 8.004361] input: UVC Camera (17ef:480c) as /class/input/input8 [ 8.010590] usbcore: registered new interface driver uvcvideo [ 8.010594] USB Video Class driver (v0.1.0)
Fingerprint Reader
This laptop uses the new Fingerprint reader that's currently missing a driver in libfprint. As this is the same reader that is used in a heap of other laptops it will probably not take that long until it works.
Thread: http://www.mail-archive.com/fprint@reactivated.net/msg00781.html
[ 3.811560] usb 2-1: configuration #1 chosen from 1 choice [ 3.813590] usb 2-1: New USB device found, idVendor=08ff, idProduct=2810 [ 3.813593] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.813595] usb 2-1: Product: Fingerprint Sensor
HSDPA Modem
Here's some dmesg output:
[ 4.332132] usb 8-4: new high speed USB device using ehci_hcd and address 2 [ 4.518071] usb 8-4: configuration #1 chosen from 2 choices [ 4.558431] usb 8-4: New USB device found, idVendor=0bdb, idProduct=1900 [ 4.558434] usb 8-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.558436] usb 8-4: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device [ 4.558438] usb 8-4: Manufacturer: Ericsson [ 4.558440] usb 8-4: SerialNumber: ............
Detailed lsusb output can be found here.
$ cu -l /dev/ttyACM0 Connected. AT+CFUN=1 OK AT+CPIN="YOUR-PIN-CODE-GOES-HERE" OK *EMWI: 1,0 +PACSP0
If you want a GUI to connect to the intartubes a newer version of Network Manager with ppp support can be found here:
deb http://debs.michaelbiebl.de/network-manager ./
But then you realise that not even a newer Network Manager helps and you resort to using wvdial:
[Dialer Defaults] Init1 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Modem Type = Analog Modem Baud = 460800 New PPPD = yes Modem = /dev/ttyACM0 ISDN = 0 Dial Command = ATDT Phone = *99# Username = username Password = password Init4 = AT+CGDCONT=1,"IP","internet.telenor.se"
Is what I'm using right now on the train. \o/
ACPI Power Management
Haven't tried any PM yet but here's what the kernel has to say. The error might be caused by me not having any docking station, just a guess though.
[ 7.610770] ACPI: \_SB_.PCI0.SATA.PRT1: found ejectable bay [ 7.610770] ACPI: \_SB_.PCI0.SATA.PRT1: Adding notify handler [ 7.610770] ACPI: Error installing bay notify handler [ 7.621495] thinkpad_acpi: ThinkPad ACPI Extras v0.20 [ 7.621495] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 7.621495] thinkpad_acpi: ThinkPad BIOS 6DET28WW (1.05 ), EC 7XHT21WW-1.03 [ 7.621495] thinkpad_acpi: Lenovo ThinkPad X200, model 74585MG [ 7.625495] thinkpad_acpi: radio switch found; radios are enabled [ 7.625495] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 7.625495] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 7.629495] Registered led device: tpacpi::thinklight [ 7.629495] Registered led device: tpacpi::power [ 7.629495] Registered led device: tpacpi:orange:batt [ 7.629495] Registered led device: tpacpi:green:batt [ 7.629495] Registered led device: tpacpi::dock_active [ 7.629495] Registered led device: tpacpi::bay_active [ 7.629495] Registered led device: tpacpi::dock_batt [ 7.629495] Registered led device: tpacpi::unknown_led [ 7.629495] Registered led device: tpacpi::standby
Suspend To RAM
After upgrading Xorg to experimental and enabling the intel driver (v2:2.4.2-1) suspend to ram started to work (should have tried from console to start with *doh*). The only problem is now that X kind of hangs, still closable with ctrl+alt+backspace which wasn't the case with the intel driver from Sid. After a restart of X everything is back to normal, wifi still works etc. Humm... that problem with X seems unpredictable, last time I suspended it worked perfectly.
- Suspend (or more specifically resumes) can indeed be unpredictable. Bug #17807 over at the FreeDesktop.org bugzilla describes similar (if not identical) symptoms and also provides a couple of solutions:
- Set Option "NoAccel" "true" in the Device section of your xorg.conf. The disadvantage is, of course, you get no hardware acceleration. Still not that slow, though.
- Take one of the CPU cores offline before suspending and bring it back online a few seconds after resuming. See Install Ubuntu 8.10 (Intrepid_Ibex) on a Thinkpad_T400#Suspend/Hibernate for a method.
- I find the second method to work great. It's not noticable in everyday use and works well in a hibernate scriptlet. –Jtmorken 22:37, 17 November 2008 (CET)
Suspend To Disk
Works out of the box.
- Not in my case! Can we provide some troubleshooting information, especially having to do with the instant-resume bug?
