Intel Graphics Media Accelerator 900
Intel Graphics Media Accelerator 900This is an Intel video adapter Features
|
Linux X.Org driver
This chip is supported by the 'i810' driver as part of the X.Org distribution
For DRI-Support, you may have to install the latest Drivers from DRI Snapshot you need following files:
common-<CurrentVersion>-linux.i386.tar.bz2
i915-<CurrentVersion>-linux.tar.bz2
Extract both in the same Directory and run install.sh
After that restart your X-Server and enjoy OpenGL-Support ;-)
At least on a T43, you also want to add acpi_sleep=s3_bios to the kernel command line (edit your LILO or GRUB configuration file to do that), in order to make sure that Xorg continues to work after a suspend/resume cycle.
Linux Intel driver
You can find Linux drivers for this card on Intel's site. The site offers much information about how to install this card on many distributions, mainly Red Hat and SuSe.
ThinkPad LCD
Display on the internal LCD works as long as you set the monitor settings correct.
External VGA port
Works well in clone mode at least, don't know about displaying two different screens.
/etc/X11/xorg.conf
Section "Device"
Identifier "Intel Corporation Intel Default Card"
Driver "i810"
BusID "PCI:0:2:0"
Option "MonitorLayout" "CRT,LFP"
Option "Clone" "true"
EndSection
Now you can enable|disable vga out with i810switch crt on|off
SVideo port
See above, but use
Option "MonitorLayout" "TV,LFP"
Now you can turn on/off the TV-Out by executing the commands
echo "dvi_enable" > /proc/acpi/ibm/video
or
echo "dvi_disable" > /proc/acpi/ibm/video
Or toggle between them with
echo "video_switch" > /proc/acpi/ibm/video
This is known to work on a T43. Hint: Of course you can also use all 3, that makes "TV,LFP,CRT" (in that order).
DVI port
DVI is not supported with this video adapter
Linux kernel Framebuffer driver
This chip will work with either the 'vesa' or 'intelfb' driver as part of any recent 2.4 or 2.6 kernel.
