Talk:Problems with SATA and Linux

From ThinkWiki
Revision as of 16:50, 3 November 2005 by Micampe (Talk | contribs) (what are the advantages of SATA?)
Jump to: navigation, search

regarding the "BIOS error 2010 on user-installed hard disk": the text says that corruption occurs if you use a harddisk without the specific ibm bios. would be interesting if it is possible to fix this problem in the kernel so that you can use any disk and the kernel doesn't use specific ATA commands which are known to cause problems.

in the tabook i didn't find any specification of the SATA bridge. it would be interesting: 1) what type it is 2) if it is fixed on the mainboard or if it is possible to solder in a new one

Another interesting question is whether these ThinkPads can be hacked to accept a real SATA system disk, by bypassing the SATA-to-PATA bridge (this would probably involve some soldering and cutting). If the BIOS can also handle that then it may come in handy, since some new high-capacity 2.5" disks have only SATA versions. --Thinker 02:56, 8 Oct 2005 (CEST)

Z series

Since the Z series uses a SATA controller and disk, without the bridge, would it be possible to make SATA ATAPI support as a module that you could load only when using the optical drive? Then, for everyday use, the experimental options of PATA and ATAPI with ata_piix would not be needed, moving you one step further in the direction of stability.

I have an R52 with Ubuntu Breezy and no problems with SATA (I personally asked the developers to include the needed patches).

However, I'd like to know wheter there are any advantages with this configuration. Future proof? Power saving? Speed?

Anybody cares to comment?

-- Michele

Retrieved from "https://www.thinkwiki.org/w/index.php?title=Talk:Problems_with_SATA_and_Linux&oldid=11560"