Lenovo Integrated Smart Card Reader
FeaturesThe smartcard reader can be used as an additional level of security, such that the user needs to put in his card (typically his badge), and provide a password. In addition it can also be used with other Electronic identity cards such as the Belgium eID. More information about smartcards in general can be found at Wikipedia
|
pcsclite's libccid driver
The driver is maintained at [1].
For Ubuntu (9.04, Jaunty Jackalope) users, a simple "sudo apt-get install libccid" is enough to get the reader working. [4] - Infos about the Ubuntu libccid package
This chip may be found in
USBID 17ef:1003 ChipsBnk
USBID ???
USBID 17ef:1003
USBID 058f:9540 Alcor Micro Corp.
Identification
Bus 006 Device 002: ID 17ef:1003 ChipsBnk
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x17ef ChipsBnk
idProduct 0x1003
bcdDevice 1.00
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 93
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 11 Chip/SmartCard
[[..]]
And in my T410 it looks like this:
Bus 002 Device 004: ID 17ef:1003 Lenovo
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x17ef Lenovo
idProduct 0x1003
bcdDevice 1.00
iManufacturer 1 Lenovo
iProduct 2 Integrated Smart Card Reader
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 93
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 11 Chip/SmartCard
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
** UNRECOGNIZED: 36 21 00 01 00 07 03 00 00 00 a0 0f 00 00 a0 0f 00 00 00 00 2a 00 00 20 a1 07 00 00 fe 00 00 00 00 00 00 00 00 00 00 00 30 02 01 00 0f 01 00 00 00 00 00 00 00 01
[[..]]
And in T430 it looks like this:
Bus 001 Device 003: ID 17ef:1003 Lenovo Integrated Smart Card Reader
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x17ef Lenovo
idProduct 0x1003 Integrated Smart Card Reader
bcdDevice 1.00
iManufacturer 1 Lenovo
iProduct 2 Integrated Smart Card Reader
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 93
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 11 Chip/SmartCard
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
ChipCard Interface Descriptor:
bLength 54
bDescriptorType 33
bcdCCID 1.00
nMaxSlotIndex 0
bVoltageSupport 7 5.0V 3.0V 1.8V
dwProtocols 3 T=0 T=1
dwDefaultClock 4000
dwMaxiumumClock 4000
bNumClockSupported 0
dwDataRate 10752 bps
dwMaxDataRate 500000 bps
bNumDataRatesSupp. 0
dwMaxIFSD 254
dwSyncProtocols 00000000
dwMechanical 00000000
dwFeatures 00010230
Auto clock change
Auto baud rate change
NAD value other than 0x00 accpeted
TPDU level exchange
[[..]]
While the T450 looks like this:
Bus 002 Device 003: ID 058f:9540 Alcor Micro Corp. Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.01
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x058f Alcor Micro Corp.
idProduct 0x9540
bcdDevice 1.20
iManufacturer 1 Generic
iProduct 2 EMV Smartcard Reader
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 93
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 50mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 11 Chip/SmartCard
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
ChipCard Interface Descriptor:
bLength 54
bDescriptorType 33
bcdCCID 1.10 (Warning: Only accurate for version 1.0)
nMaxSlotIndex 0
bVoltageSupport 7 5.0V 3.0V 1.8V
dwProtocols 3 T=0 T=1
dwDefaultClock 3700
dwMaxiumumClock 12000
bNumClockSupported 3
dwDataRate 9946 bps
dwMaxDataRate 688172 bps
bNumDataRatesSupp. 138
dwMaxIFSD 254
dwSyncProtocols 00000007 2-wire 3-wire I2C
dwMechanical 00000000
dwFeatures 000404BE
Auto configuration based on ATR
Auto activation on insert
Auto voltage selection
Auto clock change
Auto baud rate change
Auto PPS made by CCID
Auto IFSD exchange
Short and extended APDU level exchange
dwMaxCCIDMsgLen 272
bClassGetResponse echo
bClassEnvelope echo
wlcdLayout none
bPINSupport 0
bMaxCCIDBusySlots 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 0
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 12
bNumDeviceCaps 1
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000002
Link Power Management (LPM) Supported
Device Status: 0x0000
(Bus Powered)
