Install Debian Wheezy on a Thinkpad T530
Contents
Disclaimer
My t530 is running with MATE 1.6, so this is not a default install by any means, but a lot of these changes will probably still work
Out-of-the-box Stats
Component | Status |
---|---|
NVIDIA Graphics | Needs tweaks; See below |
Intel Graphics | Works out-of-box |
Fingerprint Reader | Needs tweaks |
ACPI - Suspend to Disk (Hibernate) | Untested |
Mini Display port out | Untested |
VGA out | Untested |
Firewire | Untested |
Audio in | Works out-of-box |
Audio out | Works out-of-box |
Wired LAN | Works out-of-box |
Thinkvantage Button | Untested |
Wireless - 6300AGN | Needs tweaks; See below |
Front wireless killswitch | Works out-of-box |
Touchpoint | Works out-of-box |
Touchpoint Scrolling | Needs Tweaks |
Trackpad | Works out-of-box |
Trackpad scrolling (side) | Works out-of-box |
Sound card | Works out-of-box |
Volume up/down buttons | Works out-of-box |
Volume mute button | Needs Tweaks |
Optical drive | Works out-of-box |
USB | Works out-of-box |
FN-F3 (Lock) | Works out-of-box |
FN-F4 (Sleep) | Works out-of-box |
FN-F5 (Wifi/Bluetooth) | Works out-of-box |
FN-F8 (Brightness down) | Works out-of-box |
FN-F9 (Brightness up) | Works out-of-box |
FN-Space (Thinklight/keyboard backlight) | Works out-of-box |
ACPI - Lid Open/Close | Works out-of-box |
ACPI - Suspend to RAM | Works out-of-box |
SD/MMC Memory card reader | Works out-of-box |
Hardware Tweaks
NVIDIA Graphics
To run the NVIDIA card alongside the built-in Intel Graphics chip, I used bumblebee from wheezy backports
add the file /etc/apt/sources.list.d/backports.list deb $(your debian mirror)/debian/ wheezy-backports main
Option 1 (graphical):
- Go to System -> Administration -> Synaptic Package Manager
- Click the "Reload" button to pull in the backports list
- install the bumblebee-nvidia package (this will pull in the nvidia driver as well as bumblebee)
- reboot your system
Option 2 (command line):
- run "sudo apt-get update"
- run "sudo apt-get install bumblebee-nvidia"
- reboot your system
For both, to run a program using the nvidia chip, you should prepend "prumusrun" to the command. EG, if you want to run glxgears you should run "primusrun glxgears"
You can edit menu entries to include that as well so you don't have to run everything from a terminal emulator.
Wireless - 6300AGN
This should work for any of the Intel cards that came in the T530, but I just have the 6300 to test with. Note: this requites that you are connected to the internet, the on-board Ethernet Adapter works out of the box.
Option 1 (graphical):
- Go to System -> Administration -> Synaptic Package Manager
- search for "firmware-iwlwifi" in the package manager
- select that package and install it
- reboot your system
Option 2 (command line):
- run "sudo apt-get install firmware-iwlwifi"
- reboot your system