Difference between revisions of "Lenovo Integrated Smart Card Reader"
(→This chip may be found in) |
(→Identification) |
||
Line 177: | Line 177: | ||
[[..]] | [[..]] | ||
+ | |||
+ | While the T450 looks like this: | ||
+ | |||
+ | Bus 002 Device 003: ID 058f:9540 Alcor Micro Corp. | ||
+ | Device Descriptor: | ||
+ | bLength 18 | ||
+ | bDescriptorType 1 | ||
+ | bcdUSB 2.01 | ||
+ | bDeviceClass 0 (Defined at Interface level) | ||
+ | bDeviceSubClass 0 | ||
+ | bDeviceProtocol 0 | ||
+ | bMaxPacketSize0 8 | ||
+ | idVendor 0x058f Alcor Micro Corp. | ||
+ | idProduct 0x9540 | ||
+ | bcdDevice 1.20 | ||
+ | iManufacturer 1 Generic | ||
+ | iProduct 2 EMV Smartcard Reader | ||
+ | iSerial 0 | ||
+ | bNumConfigurations 1 | ||
+ | Configuration Descriptor: | ||
+ | bLength 9 | ||
+ | bDescriptorType 2 | ||
+ | wTotalLength 93 | ||
+ | bNumInterfaces 1 | ||
+ | bConfigurationValue 1 | ||
+ | iConfiguration 0 | ||
+ | bmAttributes 0xa0 | ||
+ | (Bus Powered) | ||
+ | Remote Wakeup | ||
+ | MaxPower 50mA | ||
+ | Interface Descriptor: | ||
+ | bLength 9 | ||
+ | bDescriptorType 4 | ||
+ | bInterfaceNumber 0 | ||
+ | bAlternateSetting 0 | ||
+ | bNumEndpoints 3 | ||
+ | bInterfaceClass 11 Chip/SmartCard | ||
+ | bInterfaceSubClass 0 | ||
+ | bInterfaceProtocol 0 | ||
+ | iInterface 0 | ||
+ | ChipCard Interface Descriptor: | ||
+ | bLength 54 | ||
+ | bDescriptorType 33 | ||
+ | bcdCCID 1.10 (Warning: Only accurate for version 1.0) | ||
+ | nMaxSlotIndex 0 | ||
+ | bVoltageSupport 7 5.0V 3.0V 1.8V | ||
+ | dwProtocols 3 T=0 T=1 | ||
+ | dwDefaultClock 3700 | ||
+ | dwMaxiumumClock 12000 | ||
+ | bNumClockSupported 3 | ||
+ | dwDataRate 9946 bps | ||
+ | dwMaxDataRate 688172 bps | ||
+ | bNumDataRatesSupp. 138 | ||
+ | dwMaxIFSD 254 | ||
+ | dwSyncProtocols 00000007 2-wire 3-wire I2C | ||
+ | dwMechanical 00000000 | ||
+ | dwFeatures 000404BE | ||
+ | Auto configuration based on ATR | ||
+ | Auto activation on insert | ||
+ | Auto voltage selection | ||
+ | Auto clock change | ||
+ | Auto baud rate change | ||
+ | Auto PPS made by CCID | ||
+ | Auto IFSD exchange | ||
+ | Short and extended APDU level exchange | ||
+ | dwMaxCCIDMsgLen 272 | ||
+ | bClassGetResponse echo | ||
+ | bClassEnvelope echo | ||
+ | wlcdLayout none | ||
+ | bPINSupport 0 | ||
+ | bMaxCCIDBusySlots 1 | ||
+ | Endpoint Descriptor: | ||
+ | bLength 7 | ||
+ | bDescriptorType 5 | ||
+ | bEndpointAddress 0x81 EP 1 IN | ||
+ | bmAttributes 3 | ||
+ | Transfer Type Interrupt | ||
+ | Synch Type None | ||
+ | Usage Type Data | ||
+ | wMaxPacketSize 0x0004 1x 4 bytes | ||
+ | bInterval 1 | ||
+ | Endpoint Descriptor: | ||
+ | bLength 7 | ||
+ | bDescriptorType 5 | ||
+ | bEndpointAddress 0x02 EP 2 OUT | ||
+ | bmAttributes 2 | ||
+ | Transfer Type Bulk | ||
+ | Synch Type None | ||
+ | Usage Type Data | ||
+ | wMaxPacketSize 0x0010 1x 16 bytes | ||
+ | bInterval 0 | ||
+ | Endpoint Descriptor: | ||
+ | bLength 7 | ||
+ | bDescriptorType 5 | ||
+ | bEndpointAddress 0x83 EP 3 IN | ||
+ | bmAttributes 2 | ||
+ | Transfer Type Bulk | ||
+ | Synch Type None | ||
+ | Usage Type Data | ||
+ | wMaxPacketSize 0x0010 1x 16 bytes | ||
+ | bInterval 0 | ||
+ | Binary Object Store Descriptor: | ||
+ | bLength 5 | ||
+ | bDescriptorType 15 | ||
+ | wTotalLength 12 | ||
+ | bNumDeviceCaps 1 | ||
+ | USB 2.0 Extension Device Capability: | ||
+ | bLength 7 | ||
+ | bDescriptorType 16 | ||
+ | bDevCapabilityType 2 | ||
+ | bmAttributes 0x00000002 | ||
+ | Link Power Management (LPM) Supported | ||
+ | Device Status: 0x0000 | ||
+ | (Bus Powered) | ||
+ | |||
[[Category:Components]] | [[Category:Components]] |
Revision as of 21:38, 28 December 2015
FeaturesThe smartcard reader can be used as an additional level of security, such that the user needs to put in his card (typically his badge), and provide a password. In addition it can also be used with other Electronic identity cards such as the Belgium eID. More information about smartcards in general can be found at Wikipedia
|
pcsclite's libccid driver
The driver is maintained at [1].
For Ubuntu (9.04, Jaunty Jackalope) users, a simple "sudo apt-get install libccid" is enough to get the reader working. [4] - Infos about the Ubuntu libccid package
This chip may be found in
USBID 17ef:1003 ChipsBnk
USBID ???
USBID 17ef:1003
USBID 058f:9540 Alcor Micro Corp.
Identification
Bus 006 Device 002: ID 17ef:1003 ChipsBnk Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x17ef ChipsBnk idProduct 0x1003 bcdDevice 1.00 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 93 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 11 Chip/SmartCard [[..]]
And in my T410 it looks like this:
Bus 002 Device 004: ID 17ef:1003 Lenovo Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x17ef Lenovo idProduct 0x1003 bcdDevice 1.00 iManufacturer 1 Lenovo iProduct 2 Integrated Smart Card Reader iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 93 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 11 Chip/SmartCard bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 36 21 00 01 00 07 03 00 00 00 a0 0f 00 00 a0 0f 00 00 00 00 2a 00 00 20 a1 07 00 00 fe 00 00 00 00 00 00 00 00 00 00 00 30 02 01 00 0f 01 00 00 00 00 00 00 00 01 [[..]]
And in T430 it looks like this:
Bus 001 Device 003: ID 17ef:1003 Lenovo Integrated Smart Card Reader Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x17ef Lenovo idProduct 0x1003 Integrated Smart Card Reader bcdDevice 1.00 iManufacturer 1 Lenovo iProduct 2 Integrated Smart Card Reader iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 93 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 11 Chip/SmartCard bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 ChipCard Interface Descriptor: bLength 54 bDescriptorType 33 bcdCCID 1.00 nMaxSlotIndex 0 bVoltageSupport 7 5.0V 3.0V 1.8V dwProtocols 3 T=0 T=1 dwDefaultClock 4000 dwMaxiumumClock 4000 bNumClockSupported 0 dwDataRate 10752 bps dwMaxDataRate 500000 bps bNumDataRatesSupp. 0 dwMaxIFSD 254 dwSyncProtocols 00000000 dwMechanical 00000000 dwFeatures 00010230 Auto clock change Auto baud rate change NAD value other than 0x00 accpeted TPDU level exchange
[[..]]
While the T450 looks like this:
Bus 002 Device 003: ID 058f:9540 Alcor Micro Corp. Device Descriptor:
bLength 18 bDescriptorType 1 bcdUSB 2.01 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x058f Alcor Micro Corp. idProduct 0x9540 bcdDevice 1.20 iManufacturer 1 Generic iProduct 2 EMV Smartcard Reader iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 93 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 50mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 11 Chip/SmartCard bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 ChipCard Interface Descriptor: bLength 54 bDescriptorType 33 bcdCCID 1.10 (Warning: Only accurate for version 1.0) nMaxSlotIndex 0 bVoltageSupport 7 5.0V 3.0V 1.8V dwProtocols 3 T=0 T=1 dwDefaultClock 3700 dwMaxiumumClock 12000 bNumClockSupported 3 dwDataRate 9946 bps dwMaxDataRate 688172 bps bNumDataRatesSupp. 138 dwMaxIFSD 254 dwSyncProtocols 00000007 2-wire 3-wire I2C dwMechanical 00000000 dwFeatures 000404BE Auto configuration based on ATR Auto activation on insert Auto voltage selection Auto clock change Auto baud rate change Auto PPS made by CCID Auto IFSD exchange Short and extended APDU level exchange dwMaxCCIDMsgLen 272 bClassGetResponse echo bClassEnvelope echo wlcdLayout none bPINSupport 0 bMaxCCIDBusySlots 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 0
Binary Object Store Descriptor:
bLength 5 bDescriptorType 15 wTotalLength 12 bNumDeviceCaps 1 USB 2.0 Extension Device Capability: bLength 7 bDescriptorType 16 bDevCapabilityType 2 bmAttributes 0x00000002 Link Power Management (LPM) Supported
Device Status: 0x0000
(Bus Powered)