Difference between revisions of "User:Anobo"

From ThinkWiki
Jump to: navigation, search
(first edit)
 
m (add output of lspci -vv)
 
Line 1: Line 1:
 
I own a Thinkpad X23 brought in 2002 in Japan.
 
I own a Thinkpad X23 brought in 2002 in Japan.
 +
 +
output of lspci -vv
 +
 +
0000:00:00.0 Host bridge: Intel Corp. 82830 830 Chipset Host Bridge (rev 04)
 +
Subsystem: IBM ThinkPad A/T/X Series
 +
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
 +
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
 +
Latency: 0
 +
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
 +
Capabilities: <available only to root>
 +
 +
0000:00:01.0 PCI bridge: Intel Corp. 82830 830 Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode])
 +
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
 +
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 +
Latency: 96
 +
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
 +
I/O behind bridge: 00003000-00003fff
 +
Memory behind bridge: c0100000-c01fffff
 +
Prefetchable memory behind bridge: e0000000-e7ffffff
 +
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
 +
 +
0000:00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02) (prog-if 00 [UHCI])
 +
Subsystem: IBM ThinkPad A/T/X Series
 +
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 +
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 +
Latency: 0
 +
Interrupt: pin A routed to IRQ 11
 +
Region 4: I/O ports at 1800 [size=32]
 +
 +
0000:00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02) (prog-if 00 [UHCI])
 +
Subsystem: IBM ThinkPad A/T/X Series
 +
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 +
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 +
Latency: 0
 +
Interrupt: pin B routed to IRQ 11
 +
Region 4: I/O ports at 1820 [size=32]
 +
 +
0000:00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 02) (prog-if 00 [UHCI])
 +
Subsystem: IBM ThinkPad A/T/X Series
 +
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 +
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 +
Latency: 0
 +
Interrupt: pin C routed to IRQ 11
 +
Region 4: I/O ports at 1840 [size=32]
 +
 +
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 42) (prog-if 00 [Normal decode])
 +
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
 +
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 +
Latency: 0
 +
Bus: primary=00, secondary=02, subordinate=08, sec-latency=64
 +
I/O behind bridge: 00004000-00008fff
 +
Memory behind bridge: c0200000-cfffffff
 +
Prefetchable memory behind bridge: e8000000-f00fffff
 +
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
 +
 +
0000:00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 02)
 +
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 +
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 +
Latency: 0
 +
 +
0000:00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 02) (prog-if 8a [Master SecP PriP])
 +
Subsystem: IBM ThinkPad A/T/X Series
 +
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 +
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 +
Latency: 0
 +
Interrupt: pin A routed to IRQ 11
 +
Region 0: I/O ports at <ignored>
 +
Region 1: I/O ports at <ignored>
 +
Region 2: I/O ports at <ignored>
 +
Region 3: I/O ports at <ignored>
 +
Region 4: I/O ports at 1860 [size=16]
 +
Region 5: Memory at 18000000 (32-bit, non-prefetchable) [size=1K]
 +
 +
0000:00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus Controller (rev 02)
 +
Subsystem: IBM ThinkPad A/T/X Series
 +
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 +
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 +
Interrupt: pin B routed to IRQ 11
 +
Region 4: I/O ports at 1880 [size=32]
 +
 +
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio Controller (rev 02)
 +
Subsystem: IBM ThinkPad T23 (2647-4MG) or A30/A30p (2652/2653)
 +
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 +
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 +
Latency: 0
 +
Interrupt: pin B routed to IRQ 11
 +
Region 0: I/O ports at 1c00 [size=256]
 +
Region 1: I/O ports at 18c0 [size=64]
 +
 +
0000:00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem Controller (rev 02) (prog-if 00 [Generic])
 +
Subsystem: IBM: Unknown device 0227
 +
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 +
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 +
Interrupt: pin B routed to IRQ 11
 +
Region 0: I/O ports at 2400 [size=256]
 +
Region 1: I/O ports at 2000 [size=128]
 +
 +
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY (prog-if 00 [VGA])
 +
Subsystem: IBM ThinkPad X22/X23/X24
 +
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+
 +
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 +
Latency: 66 (2000ns min), Cache Line Size: 0x08 (32 bytes)
 +
Interrupt: pin A routed to IRQ 11
 +
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
 +
Region 1: I/O ports at 3000 [size=256]
 +
Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
 +
Expansion ROM at <unassigned> [disabled] [size=128K]
 +
Capabilities: <available only to root>
 +
 +
0000:02:03.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a8)
 +
Subsystem: IBM: Unknown device 0184
 +
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
 +
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 +
Latency: 64
 +
Interrupt: pin A routed to IRQ 11
 +
Region 0: Memory at 50000000 (32-bit, non-prefetchable) [size=4K]
 +
Bus: primary=02, secondary=03, subordinate=05, sec-latency=176
 +
I/O window 0: 00000000-00000003
 +
I/O window 1: 00000000-00000003
 +
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
 +
16-bit legacy interface ports at 0001
 +
 +
0000:02:03.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a8)
 +
Subsystem: IBM: Unknown device 0184
 +
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
 +
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 +
Latency: 64
 +
Interrupt: pin B routed to IRQ 11
 +
Region 0: Memory at 50100000 (32-bit, non-prefetchable) [size=4K]
 +
Bus: primary=02, secondary=06, subordinate=08, sec-latency=176
 +
I/O window 0: 00000000-00000003
 +
I/O window 1: 00000000-00000003
 +
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
 +
16-bit legacy interface ports at 0001
 +
 +
0000:02:03.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (prog-if 10 [OHCI])
 +
Subsystem: IBM: Unknown device 01cf
 +
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
 +
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 +
Latency: 64 (500ns min, 1000ns max)
 +
Interrupt: pin C routed to IRQ 11
 +
Region 0: Memory at c0201000 (32-bit, non-prefetchable) [size=2K]
 +
Capabilities: <available only to root>
 +
 +
0000:02:05.0 Network controller: Intersil Corporation Prism 2.5 Wavelan chipset (rev 01)
 +
Subsystem: Actiontec Electronics Inc: Unknown device 0406
 +
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
 +
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 +
Latency: 64, Cache Line Size: 0x08 (32 bytes)
 +
Interrupt: pin A routed to IRQ 11
 +
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=4K]
 +
Capabilities: <available only to root>
 +
 +
0000:02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42)
 +
Subsystem: IBM ThinkPad A/T/X Series
 +
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
 +
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 +
Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 0x08 (32 bytes)
 +
Interrupt: pin A routed to IRQ 11
 +
Region 0: Memory at c0200000 (32-bit, non-prefetchable) [size=4K]
 +
Region 1: I/O ports at 8000 [size=64]
 +
Capabilities: <available only to root>

Latest revision as of 21:48, 2 June 2007

I own a Thinkpad X23 brought in 2002 in Japan.

output of lspci -vv

0000:00:00.0 Host bridge: Intel Corp. 82830 830 Chipset Host Bridge (rev 04) Subsystem: IBM ThinkPad A/T/X Series Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M] Capabilities: <available only to root>

0000:00:01.0 PCI bridge: Intel Corp. 82830 830 Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 96 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00003000-00003fff Memory behind bridge: c0100000-c01fffff Prefetchable memory behind bridge: e0000000-e7ffffff BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-

0000:00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02) (prog-if 00 [UHCI]) Subsystem: IBM ThinkPad A/T/X Series Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 4: I/O ports at 1800 [size=32]

0000:00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02) (prog-if 00 [UHCI]) Subsystem: IBM ThinkPad A/T/X Series Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 11 Region 4: I/O ports at 1820 [size=32]

0000:00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 02) (prog-if 00 [UHCI]) Subsystem: IBM ThinkPad A/T/X Series Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 11 Region 4: I/O ports at 1840 [size=32]

0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 42) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=02, subordinate=08, sec-latency=64 I/O behind bridge: 00004000-00008fff Memory behind bridge: c0200000-cfffffff Prefetchable memory behind bridge: e8000000-f00fffff BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-

0000:00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0

0000:00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: IBM ThinkPad A/T/X Series Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at <ignored> Region 1: I/O ports at <ignored> Region 2: I/O ports at <ignored> Region 3: I/O ports at <ignored> Region 4: I/O ports at 1860 [size=16] Region 5: Memory at 18000000 (32-bit, non-prefetchable) [size=1K]

0000:00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus Controller (rev 02) Subsystem: IBM ThinkPad A/T/X Series Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 11 Region 4: I/O ports at 1880 [size=32]

0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio Controller (rev 02) Subsystem: IBM ThinkPad T23 (2647-4MG) or A30/A30p (2652/2653) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 11 Region 0: I/O ports at 1c00 [size=256] Region 1: I/O ports at 18c0 [size=64]

0000:00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem Controller (rev 02) (prog-if 00 [Generic]) Subsystem: IBM: Unknown device 0227 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 11 Region 0: I/O ports at 2400 [size=256] Region 1: I/O ports at 2000 [size=128]

0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY (prog-if 00 [VGA]) Subsystem: IBM ThinkPad X22/X23/X24 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 66 (2000ns min), Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 3000 [size=256] Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: <available only to root>

0000:02:03.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a8) Subsystem: IBM: Unknown device 0184 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Interrupt: pin A routed to IRQ 11 Region 0: Memory at 50000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=03, subordinate=05, sec-latency=176 I/O window 0: 00000000-00000003 I/O window 1: 00000000-00000003 BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001

0000:02:03.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a8) Subsystem: IBM: Unknown device 0184 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Interrupt: pin B routed to IRQ 11 Region 0: Memory at 50100000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=06, subordinate=08, sec-latency=176 I/O window 0: 00000000-00000003 I/O window 1: 00000000-00000003 BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001

0000:02:03.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (prog-if 10 [OHCI]) Subsystem: IBM: Unknown device 01cf Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min, 1000ns max) Interrupt: pin C routed to IRQ 11 Region 0: Memory at c0201000 (32-bit, non-prefetchable) [size=2K] Capabilities: <available only to root>

0000:02:05.0 Network controller: Intersil Corporation Prism 2.5 Wavelan chipset (rev 01) Subsystem: Actiontec Electronics Inc: Unknown device 0406 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 11 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=4K] Capabilities: <available only to root>

0000:02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42) Subsystem: IBM ThinkPad A/T/X Series Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 11 Region 0: Memory at c0200000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 8000 [size=64] Capabilities: <available only to root>