Difference between revisions of "Serial Ultrabay Slim HDD Adapter II"
(→Supported with) |
(caddy with plastic surrounding the socket not going to work for you) |
||
| Line 28: | Line 28: | ||
*[[X200 UltraBase]] | *[[X200 UltraBase]] | ||
*[[ThinkPad UltraBase Series 3]] | *[[ThinkPad UltraBase Series 3]] | ||
| + | |||
| + | ===Finding correct adapter=== | ||
| + | please pay attention to the plastic border if you are buying from third parties. | ||
| + | <gallery widths=200px> | ||
| + | image:T410-hdd-caddy-good.jpg|appropriate socket surrounding | ||
| + | image:t410-hdd-caddy-loosing-connection.jpg|that caddy would not be able to provide good connection due to plastic surrounding of the sata socket | ||
| + | </gallery> | ||
=== Installation === | === Installation === | ||
Revision as of 18:49, 3 March 2013
|
This adapter allows an extra hard drive to be inserted into the Serial Ultrabay Slim. Features
|
|
NOTE!
This SATA HDD adapter only works with select ThinkPads as listed below. For other machines with UltraBay Slim, use the PATA base UltraBay Slim HDD Adapter or the previous Ultrabay Slim SATA HDD Adapter or Ultrabay Slim SATA HDD Adapter II instead.
Part numbers
- Marketing P/N: 43N3412
- ASM P/N: 43N3414
- FRU P/N: 43N3415
Linux support
If connected at boot time then the drive is normally /dev/sdb
Supported with
- ThinkPad R400, R500
- ThinkPad T400, T400s, T410, T410s, T500, T510, T520
- ThinkPad W500, W510, W520, W530, W700, W700ds, W701, W701ds
- X200 UltraBase
- ThinkPad UltraBase Series 3
Finding correct adapter
please pay attention to the plastic border if you are buying from third parties.
appropriate socket surrounding
that caddy would not be able to provide good connection due to plastic surrounding of the sata socket
Installation
Screw 4 screws in the mounting holes of the hard disk / solid state drive.
Slide the screw heads under the plastic notches while plugging in the drive in the Ultrabay adapter.
Finally, close the black plastic lever to prevent the drive from sliding backwards.
