Difference between revisions of "Serial Ultrabay Slim HDD Adapter II"
(→Ultrabay Slim ThinkPad Serial Hard Drive Bay Adapter III) |
(→Supported with) |
||
| Line 26: | Line 26: | ||
*ThinkPad {{T400}}, {{T400s}}, {{T410}}, {{T410s}}, {{T500}}, {{T510}}, {{T520}} | *ThinkPad {{T400}}, {{T400s}}, {{T410}}, {{T410s}}, {{T500}}, {{T510}}, {{T520}} | ||
*ThinkPad {{W500}}, {{W510}}, {{W520}}, {{W700}}, {{W700ds}}, {{W701}}, {{W701ds}} | *ThinkPad {{W500}}, {{W510}}, {{W520}}, {{W700}}, {{W700ds}}, {{W701}}, {{W701ds}} | ||
| − | * | + | *[[X200 UltraBase]] |
| + | *[[ThinkPad UltraBase Series 3]] | ||
=== Installation === | === Installation === | ||
Revision as of 11:54, 15 May 2012
|
This adapter allows an extra hard drive to be inserted into the Serial Ultrabay Slim. Features
|
|
NOTE!
This SATA HDD adapter only works with select ThinkPads as listed below. For other machines with UltraBay Slim, use the PATA base UltraBay Slim HDD Adapter or the previous Ultrabay Slim SATA HDD Adapter or Ultrabay Slim SATA HDD Adapter II instead.
Part numbers
- Marketing P/N: 43N3412
- ASM P/N: 43N3414
- FRU P/N: 43N3415
Linux support
If connected at boot time then the drive is normally /dev/sdb
Supported with
- ThinkPad R400, R500
- ThinkPad T400, T400s, T410, T410s, T500, T510, T520
- ThinkPad W500, W510, W520, W700, W700ds, W701, W701ds
- X200 UltraBase
- ThinkPad UltraBase Series 3
Installation
Screw 4 screws in the mounting holes of the hard disk / solid state drive.
Slide the screw heads under the plastic notches while plugging in the drive in the Ultrabay adapter.
Finally, close the black plastic lever to prevent the drive from sliding backwards.
