Installing Gentoo on a ThinkPad X220

DRAFT! Installing Gentoo on a Lenovo X220 DRAFT!

Model Specs

General Specs

X220 - 4290-W1B, i5-2520M, 4GB RAM

replaced internal HD with SSD Intel 320 Series 120GB, 2.5", SATA II (SSDSA2CW120G310)

cpuinfo

processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 42
model name      : Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz
stepping        : 7
cpu MHz         : 2501.000
cache size      : 3072 KB
physical id     : 0
siblings        : 4
core id         : 0
cpu cores       : 2
apicid          : 0
initial apicid  : 0
fpu             : yes
fpu_exception   : yes
cpuid level     : 13
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 x2apic popcnt aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dts tpr_shadow vnmi flexpriority ept vpid
bogomips        : 4983.17
clflush size    : 64
cache_alignment : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:

lspci

00:00.0 Host bridge: Intel Corporation Device 0104 (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Device 0126 (rev 09)
00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04)
00:16.3 Serial controller: Intel Corporation Cougar Point KT Controller (rev 04)
00:19.0 Ethernet controller: Intel Corporation Device 1502 (rev 04)
00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b4)
00:1c.3 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 4 (rev b4)
00:1c.4 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 5 (rev b4)
00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Device 1c4f (rev 04)
00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 04)
03:00.0 Network controller: Intel Corporation Device 0085 (rev 34)
0d:00.0 System peripheral: Ricoh Co Ltd Device e823 (rev 04)

lsusb

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor
Bus 001 Device 004: ID 04f2:b217 Chicony Electronics Co., Ltd 

Required Kernel modules for the X220 hardware

• Intel Gigabit Ethernet: e1000e

BIOS Update

Turns out to be very Linux unfriendly. There a ways to boot the .iso image with grub. I tried grub2 with help from syslinux memdisk, reached some kind of bios update menu. But got stuck there. After all I did it by installing Win7 and running the Windows BIOS update tool.

Boot from USB Stick

Sysresccd (2.2.0), which has a pretty nice script to create a bootable USB-Stick, failed to boot on the X220. Created an bootable usb stick from the gentoo-minimal.iso with unetbootin. Works.

Partition the Drive

# parted

(parted) mklabel gpt

(parted) mkpart primary fat32 1 201

NOTE!

We don't start with sector 0 because of alignment. I am not sure if the result is optimal, but at least parted doesn't complain

(parted) set 1 boot on

(parted) mkpart primary linux-swap 202 4047

(parted) mkpart pimrary ext2 4048 120GB

Format the partitions

# mkfs.vfat /dev/sda1

# mkswap /dev/sda2

# mkfs.btrfs /dev/sda3

NOTE!

The mkfs.btrfs binary is not yet on the gentoo minimal image.

Gentoo stage3

Just like the handbook, boot from gentoo-minimal-image. Unpack stage3 and portage. Edit fstab and set a root password. Everything else can be done later on.

Grub with efi support installation

This was by far the hardest part yet. Because UEFI and GPT a relatively new and I am not so familiar with it and the documentation isn't so good yet. Basically EFI on the X220 looks for a FAT32 formatted GPT partition with the boot flag set. If it finds one it tries to start /EFI/boot/bootx64.efi (Note that this is actually case-insensitive because of FAT32).

Grub-1.99 from scarabeus overlay is needed. Fix the STRIP_MASK error, remove last "a". Enable GRUB_PLATFORMS=efi-64 in make.conf. TODO add tar.gz with fixed ebuild for adding to overlay

Not sure if this is needed:

cp /usr/share/grub/{unicode.pf2,ascii.pf2} /boot/efi/efi/grub/

grub2-install --boot-directory=/boot/efi/efi --bootloader-id=grub --no-floppy --recheck

Important part:

grub-mkimage -d /lib/grub/x86_64-efi -O x86_64-efi -p "" -o /boot/efi/efi/boot/bootx64.efi part_gpt btrfs fat ext2 normal chain boot configfile linux multiboot efi_gop

Optional but useful:

cp /lib/grub/x86_64-efi/*.mod /boot/efi/efi/boot/

cp /lib/grub/x86_64-efi/*.lst /boot/efi/efi/boot/

Put grub.cf in same directory as bootx64.efi -> /boot/efi/efi/boot/

Thanks to Finnbarr P. Murphy for his blog posts about Grub and UEFI

Kernel

For UEFI you have to use a kernel > 3.0-rc1

My current Kernel .config. Please feel free to comment if you have spotted an unnecessary enabled hardware option or something that should be enabled on the X220. This is work in progress :)

Finishing touches

Set timezone

Set locale.gen