Difference between revisions of "Serial Ultrabay Slim HDD Adapter II"
| Line 32: | Line 32: | ||
=== Installation === | === Installation === | ||
| − | Screw 4 screws in the mounting holes of the hard disk / solid state drive. Slide the screw heads under the plastic notches while plugging in the drive in the Ultrabay adapter. Finally, close the black plastic lever to prevent the drive from sliding backwards. | + | Screw 4 screws in the mounting holes of the hard disk / solid state drive. |
| + | |||
| + | [[image:Hdd-screws.jpg]] | ||
| + | |||
| + | Slide the screw heads under the plastic notches while plugging in the drive in the Ultrabay adapter. | ||
| + | |||
| + | [[image:Ultrabay-plastic-notches.jpg]] | ||
| + | |||
| + | Finally, close the black plastic lever to prevent the drive from sliding backwards. | ||
===External Links=== | ===External Links=== | ||
Revision as of 16:46, 10 May 2011
Ultrabay Slim ThinkPad Serial Hard Drive Bay Adapter IIIThis is an adapter to connect an additional hard disk drive to the Ultrabay Slim. Features
|
|
NOTE!
This SATA HDD adapter only works with select ThinkPads as listed below. For other machines with UltraBay Slim, use the PATA base UltraBay Slim HDD Adapter or the previous Ultrabay Slim SATA HDD Adapter or Ultrabay Slim SATA HDD Adapter II instead.
Part numbers
- Marketing PN: 43N3412
- FRU PN:
Linux support
If connected at boot time then the drive is normally /dev/sdb
Supported with
- ThinkPad R400, R500
- ThinkPad T400, T400s, T410, T410s, T500, T510
- ThinkPad W500, W510, W520, W700, W700ds, W701, W701ds
- ThinkPads with X200 UltraBase (in the Ultrabay of the optional ThinkPad X200 UltraBase)
Installation
Screw 4 screws in the mounting holes of the hard disk / solid state drive.
Slide the screw heads under the plastic notches while plugging in the drive in the Ultrabay adapter.
Finally, close the black plastic lever to prevent the drive from sliding backwards.
