Difference between revisions of "Talk:Problem with fan noise"
(→Thinkpad R32 with Radeon Mobility M6) |
|||
| Line 35: | Line 35: | ||
== Thinkpad R32 with Radeon Mobility M6 == | == Thinkpad R32 with Radeon Mobility M6 == | ||
| − | Updating xorg-x11 from 6.7.0 to 6.8.2 and using Speedstep (with the ondemand | + | Updating xorg-x11 from 6.7.0 to 6.8.2 and using Speedstep (with the ondemand module in this case) helped cooling the system down significantly: |
| + | |||
| + | * before updating the CPU was ~62 C in idle state, and got very near the critical temperature (72 C) during heavy load - I even got some freezes because of the heat ;) | ||
| + | * after the update the CPU is ~54 C in idle state, and still gets to about 68 C while under heavy load | ||
| + | |||
| + | The second sensor (which may be the GPU) is somehow fixed to 50 C (maybe a bug?) | ||
| + | |||
| + | The fan on the R32 is behaving like this: | ||
| + | |||
| + | * > 61 -> fan in state 2 (quite noisy) | ||
| + | * < 55 -> fan in state 1 (less noisy :) ) | ||
| + | |||
But I remember using my old SuSE distribution with kernel 2.4.16, apm and some old x11 version the fan actually stopped completely from time to time. | But I remember using my old SuSE distribution with kernel 2.4.16, apm and some old x11 version the fan actually stopped completely from time to time. | ||
| − | Concerning the maximum temperature, I found that the critical temperature on the R32 for the | + | Concerning the maximum temperature of the CPU, I found that the critical temperature on the R32 for the CPU sensor is 72 C |
| + | (using {{cmdroot|cat /proc/acpi/thermal_zone/THM0/trip_points }} ) | ||
---- | ---- | ||
What is the maximum temperature for CPU and GPU ? 55° 60° ? | What is the maximum temperature for CPU and GPU ? 55° 60° ? | ||
Revision as of 19:58, 13 May 2005
Problem with fan noise on R51 1829 L7G (ATI M9)
On my R51 the fan is behaving like this:
- > 45C -> fan on;
- < 38C -> fan off.
By using cpufreq + laptop_mode + Xorg DynamicClocks + WiFi power management, I get the fan stopped time to time, but only for 3 minutes time (transition from 38 C -> 45 C). The cooling down cycle is taking 20 minutes in the best case.
I knew about the 'ibm_acpi experimental=1' trick, but in my opinion this is not very useful since nobody can guarantee that a temperature greater then 45 C will not damage the laptop and in the same time the transition time is very short (the laptop gets hot fast without fan).
Thinkpad T42 Radeon Mobility M7
When Xorg is running, the fan is always one and pretty loud ! Setting DynamicClocks does not help
it's clear that the GPU is the problem on the thinkpad :
after 10minutes with the fan off temperatures: 44 47 33 52 32 -128 24 -128
1: CPU 2: Mini PCI Module 3: HDD 4: GPU 5: Battery 6: N/A 7: Battery 8: N/A
Controlling the fan speed would be really cool !
What is the maximum temperature not to cross ?
Thinkpad R32 with Radeon Mobility M6
Updating xorg-x11 from 6.7.0 to 6.8.2 and using Speedstep (with the ondemand module in this case) helped cooling the system down significantly:
- before updating the CPU was ~62 C in idle state, and got very near the critical temperature (72 C) during heavy load - I even got some freezes because of the heat ;)
- after the update the CPU is ~54 C in idle state, and still gets to about 68 C while under heavy load
The second sensor (which may be the GPU) is somehow fixed to 50 C (maybe a bug?)
The fan on the R32 is behaving like this:
- > 61 -> fan in state 2 (quite noisy)
- < 55 -> fan in state 1 (less noisy :) )
But I remember using my old SuSE distribution with kernel 2.4.16, apm and some old x11 version the fan actually stopped completely from time to time.
Concerning the maximum temperature of the CPU, I found that the critical temperature on the R32 for the CPU sensor is 72 C
(using # cat /proc/acpi/thermal_zone/THM0/trip_points )
What is the maximum temperature for CPU and GPU ? 55° 60° ?
