Difference between revisions of "Installing OPENSUSE 10.3 on a ThinkPad T61p"
Markwenzel (Talk | contribs) |
|||
| (3 intermediate revisions by one other user not shown) | |||
| Line 2: | Line 2: | ||
Experiences installing OpenSUSE 10.3 x86_64 on a T61 as a dual boot system with Windows Vista. | Experiences installing OpenSUSE 10.3 x86_64 on a T61 as a dual boot system with Windows Vista. | ||
| − | <h1> Partitioning </h1> | + | <h1> Partitioning and boot loader</h1> |
| − | OpenSUSE suggested to shrink the windows partition to 60GB which was fine. However, the linux partitions needed some changes from what was proposed as a default: | + | OpenSUSE suggested to shrink the windows partition to 60GB which was fine since I spend most of mytime in OpenSUSE. However, the linux partitions needed some changes from what was proposed as a default (everything under an extended partition) to ensure dual boot. After the windows partition, I chose: |
| + | <ul> | ||
| + | <li>A primary partition of 100MB (Ext3) as /boot (check that "set partition to active" is flagged) to install GRUB </li> | ||
| + | <li>An extended partition for the rest: | ||
| + | <ul> | ||
| + | <li>Partition for / </li> | ||
| + | <li>Partition for /home </li> | ||
| + | </ul> | ||
| + | </li> | ||
| + | </ul> | ||
| + | |||
| + | For GRUB, I chose to install to /boot and kept the default choices. | ||
| + | |||
| + | <h1>Graphics card</h1> | ||
| + | OpenSUSE 10.3 recognizes the Nvidia Quadro FX 570M card, but this gives a somewhat false feeling of safety. The installation of OpenSUSE completed without a glitch. At the end of the installation, OpenSUSE directs you to the graphical login screen which resulted in a blank screen. | ||
| + | |||
| + | Pressing ctrl-alt-backspace gets you out of the X11 server and shows a nice prompt. After spending some time searching for the problem I came up with the following: Check in the BIOS that under Display, the display to boot is set to "Thinkpad LCD" (mine was set to Analog(VGA) which tries to use an eternal screen). Afterwards I ran xorgconfig and chose the generic Nvidia driver. | ||
| + | |||
| + | Next I installed the Nvidia driver available from the Nvidia website. | ||
| + | ---- | ||
| + | another Laptop with 1920x1200 resolution: | ||
| + | |||
| + | No graphical login screen at all (just a blank screen) after installation because of a unusable xorg.conf. Pressing ctrl-alt-backspace did not work. Using (ctrl-)alt-F1 to go to first console has also no effect. How to get it run: | ||
| + | |||
| + | Boot into runlevel 3 (just type 3 at boot prompt of grub) and login as root. cd to /etc/X11. copy xorg.conf.install to xorg.conf. After that run startx to get a gui, open konqueror and go to http://opensuse-community.org/nvidia.ymp to install the nvidia driver. Final open a console and enter nvidia-xconfig to use the nvidia driver. After a restart of the X-server you can use the graphical login. | ||
| + | |||
| + | <h1>Sound</h1> | ||
| + | Download the latest alsa packages: alsa, alsa-utils, also-tools. At the time of this writing these were the 1.0.16 versions. Next run alsaconf. | ||
| + | |||
| + | <h1>Conclusion</h1> | ||
| + | All considered, a fairly straightforward install. OpenSUSE happily coexists with Windows. | ||
Latest revision as of 17:34, 10 May 2008
Introduction
Experiences installing OpenSUSE 10.3 x86_64 on a T61 as a dual boot system with Windows Vista.
Partitioning and boot loader
OpenSUSE suggested to shrink the windows partition to 60GB which was fine since I spend most of mytime in OpenSUSE. However, the linux partitions needed some changes from what was proposed as a default (everything under an extended partition) to ensure dual boot. After the windows partition, I chose:
- A primary partition of 100MB (Ext3) as /boot (check that "set partition to active" is flagged) to install GRUB
- An extended partition for the rest:
- Partition for /
- Partition for /home
For GRUB, I chose to install to /boot and kept the default choices.
Graphics card
OpenSUSE 10.3 recognizes the Nvidia Quadro FX 570M card, but this gives a somewhat false feeling of safety. The installation of OpenSUSE completed without a glitch. At the end of the installation, OpenSUSE directs you to the graphical login screen which resulted in a blank screen.
Pressing ctrl-alt-backspace gets you out of the X11 server and shows a nice prompt. After spending some time searching for the problem I came up with the following: Check in the BIOS that under Display, the display to boot is set to "Thinkpad LCD" (mine was set to Analog(VGA) which tries to use an eternal screen). Afterwards I ran xorgconfig and chose the generic Nvidia driver.
Next I installed the Nvidia driver available from the Nvidia website.
another Laptop with 1920x1200 resolution:
No graphical login screen at all (just a blank screen) after installation because of a unusable xorg.conf. Pressing ctrl-alt-backspace did not work. Using (ctrl-)alt-F1 to go to first console has also no effect. How to get it run:
Boot into runlevel 3 (just type 3 at boot prompt of grub) and login as root. cd to /etc/X11. copy xorg.conf.install to xorg.conf. After that run startx to get a gui, open konqueror and go to http://opensuse-community.org/nvidia.ymp to install the nvidia driver. Final open a console and enter nvidia-xconfig to use the nvidia driver. After a restart of the X-server you can use the graphical login.
Sound
Download the latest alsa packages: alsa, alsa-utils, also-tools. At the time of this writing these were the 1.0.16 versions. Next run alsaconf.
Conclusion
All considered, a fairly straightforward install. OpenSUSE happily coexists with Windows.
