Difference between revisions of "Installing Ubuntu 8.04 (Hardy Heron) on a ThinkPad X61 Tablet"
(added external link) |
Compotatoj (Talk | contribs) m (→External Links: Fixed link.) |
||
Line 138: | Line 138: | ||
== External Links == | == External Links == | ||
− | [ | + | [http://blog.aliencam.net/?page_id=438 Customized Ubuntu Hardy Setup Guide on X61t Hardware]. |
[[Category:X61 Tablet]] | [[Category:X61 Tablet]] |
Revision as of 04:20, 8 May 2008
Here is an expanding description on what we did to get Alpha_5 of Hardy on working better on the X61 Tablet. I downloaded the alternate Version and installed as the instructions said.
Contents
Graphic
Graphics Card
3D acceleration and Compiz Fusion worked out of the box.
X
Edit /etc/X11/xorg.conf and add to Section Screen
SubSection "Display" Virtual 3000 2250 EndSubSection
The Parameters behind Virtual must be bigger than all your Displays added together (3000 = 1400 + 1600) Now you can adust you settings with xrandr. e.g.:
xrandr --output LVDS --rotate left xrandr --output LVDS --rotate normal xrandr --output VGA --auto --right-of LVDS …
Konsole
Edit /etc/modprobe.d/blacklist-framebuffer and comment this out:
#blacklist vesafb #blacklist vga16fb
Add to /etc/initramfs-tools/modules
fbcon vesafb vga16fb
Run
sudo update-initramfs -u
Edit /boot/grub/menu.lst and change at defoptions:
vga=0x31b
Run
sudo update-grub
Input Devices
Keyboard
In some cases the mute button won't work.
For this add in the /boot/grub/menu.lst file following kernel parameter:
acpi_osi="Linux"
Run
sudo update-grub
Stylus
Enable it as described in Wacom_Serial_Tablet_PC_Stylus: Add to /etc/X11/xorg.conf:
Section "InputDevice" Driver "wacom" Identifier "cursor" Option "Device" "/dev/ttyS0" Option "Type" "cursor" Option "ForceDevice" "ISDV4" Option "Mode" "Absolute" EndSection Section "InputDevice" Driver "wacom" Identifier "stylus" Option "Device" "/dev/ttyS0" Option "Type" "stylus" Option "ForceDevice" "ISDV4" EndSection Section "InputDevice" Driver "wacom" Identifier "eraser" Option "Device" "/dev/ttyS0" Option "Type" "eraser" Option "ForceDevice" "ISDV4" EndSection
and in Section ServerLayout:
InputDevice "cursor" "SendCoreEvents" InputDevice "stylus" "SendCoreEvents"
Trackpoint
The three mouse buttons and trackpoint nipple/stick/nub work out of the box.
If you want the middle mouse button and the nipple to function together as a mouse wheel, add the following to the Configured Mouse Input Device section in /etc/X11/xorg.config:
Option "EmulateWheel" "true" Option "EmulateWheelButton" "2"
Tilt Detection
These steps have been referenced from Krizka's Blog with a few changes.
1) Install the necessary build tools:
sudo aptitude install build-essential linux-kernel-headers
2) Download the tp_smapi package. It contains all the necessary sources for the hdaps module. This tutorial will be using tp_smapi version 0.36. Download Here. I downloaded the package to /opt.
3) Extract the packge:
sudo tar -xvzf tp_smapi-0.36.tgz
4) After unpacking, I didn't have permissions to enter the folder. Still being new to Linux, I changed the folder's access permissions using:
sudo chmod 777 tp_smapi-0.36
For those of you who know better, I wouldn't recommend using 777, as that allows the folder to be read and edited by anyone. Enter the folder:
cd tp_smapi-0.36
5) Build the sources:
sudo make HDAPS=1 KSRC=/usr/src/linux-headers-`uname -r`
6) Install the module:
sudo make install HDAPS=1 KSRC=/usr/src/linux-headers-`uname -r`
7) Install hdaps-utils in order to test the new module:
sudo aptitude install hdaps-utils
8) Load the new modules:
sudo modprobe -a tp_smapi hdaps
9) Run a test. hdaps-gl should open up a new window showing the tablet's orientation. If you don't want to use a graphical tool, hdaps-pivot prints its output to the command line:
hdaps-gl
10) To make sure your system loads the modules at boot time add "tp_smapi" and "hdaps", without the quotes and one per line, to /etc/modules. Using echo didn't work for me, so I used pico:
sudo pico /etc/modules
11) And update your initramfs:
sudo update-initramfs -u