Difference between revisions of "Installing OPENSUSE 10.3 on a ThinkPad T61p"
| Line 17: | Line 17: | ||
<h1>Graphics card</h1> | <h1>Graphics card</h1> | ||
| − | OpenSUSE 10.3 recognizes the Nvidia Quadro FX 570M card, but this gives a somewhat false feeling of safety. The installation of OpenSUSE completed without a glitch. At the end of the installation, OpenSUSE directs you to the graphical login | + | OpenSUSE 10.3 recognizes the Nvidia Quadro FX 570M card, but this gives a somewhat false feeling of safety. The installation of OpenSUSE completed without a glitch. At the end of the installation, OpenSUSE directs you to the graphical login screen which resulted in a blank screen. |
| − | Pressing ctrl-alt-backspace gets you out of the X11 server and shows a nice prompt. After spending some time searching for the problem I came up with the following: Check in the BIOS that under Display, the display to boot is set to "Thinkpad LCD" (mine was set to Analog(VGA) which tries to use an eternal screen). Afterwards I ran xorgconfig | + | Pressing ctrl-alt-backspace gets you out of the X11 server and shows a nice prompt. After spending some time searching for the problem I came up with the following: Check in the BIOS that under Display, the display to boot is set to "Thinkpad LCD" (mine was set to Analog(VGA) which tries to use an eternal screen). Afterwards I ran xorgconfig and chose the generic Nvidia driver. |
Next I installed the Nvidia driver available from the Nvidia website. | Next I installed the Nvidia driver available from the Nvidia website. | ||
| Line 25: | Line 25: | ||
<h1>Sound</h1> | <h1>Sound</h1> | ||
Download the latest alsa packages: alsa, alsa-utils, also-tools. At the time of this writing these were the 1.0.16 versions. Next run alsaconf. | Download the latest alsa packages: alsa, alsa-utils, also-tools. At the time of this writing these were the 1.0.16 versions. Next run alsaconf. | ||
| + | |||
| + | <h1>Conclusion</h1> | ||
| + | All considered, a fairly straightforward install. OpenSUSE happily coexists with Windows. | ||
Revision as of 09:47, 16 April 2008
Introduction
Experiences installing OpenSUSE 10.3 x86_64 on a T61 as a dual boot system with Windows Vista.
Partitioning and boot loader
OpenSUSE suggested to shrink the windows partition to 60GB which was fine since I spend most of mytime in OpenSUSE. However, the linux partitions needed some changes from what was proposed as a default (everything under an extended partition) to ensure dual boot. After the windows partition, I chose:
- A primary partition of 100MB (Ext3) as /boot (check that "set partition to active" is flagged) to install GRUB
- An extended partition for the rest:
- Partition for /
- Partition for /home
For GRUB, I chose to install to /boot and kept the default choices.
Graphics card
OpenSUSE 10.3 recognizes the Nvidia Quadro FX 570M card, but this gives a somewhat false feeling of safety. The installation of OpenSUSE completed without a glitch. At the end of the installation, OpenSUSE directs you to the graphical login screen which resulted in a blank screen.
Pressing ctrl-alt-backspace gets you out of the X11 server and shows a nice prompt. After spending some time searching for the problem I came up with the following: Check in the BIOS that under Display, the display to boot is set to "Thinkpad LCD" (mine was set to Analog(VGA) which tries to use an eternal screen). Afterwards I ran xorgconfig and chose the generic Nvidia driver.
Next I installed the Nvidia driver available from the Nvidia website.
Sound
Download the latest alsa packages: alsa, alsa-utils, also-tools. At the time of this writing these were the 1.0.16 versions. Next run alsaconf.
Conclusion
All considered, a fairly straightforward install. OpenSUSE happily coexists with Windows.
