View source for Installing OPENSUSE 11.1 on a ThinkPad T61p

Installing opensuse 11.1 on T61p.

== Configuration ==
My T61p is a 6457-BQG, Intel Core2Duo 2,6GHz, 4GB RAM, 180 GB HDD, Nvidia Quadro FX 570M, 15.4" TFT (1900x1200), Intel AGN 4965 wifi, Bluetooth, Intel Corporation 82801H (ICH8 Family) HD Audio.

== Installation ==
Factory disk: two partitions: r&r and vista. I was first preparing a dual boot system, but gparted was not able to resize the vista partition. After many retries, I dropped the idea of dual boot and decided for suse-only system. I kept only the r&r and partitioned the rest with gparted as:

 /dev/sda1 r&r 6GB
 /dev/sda2 /boot 64MB
 /dev/sda3 extended
 /dev/sda5 / 40GB
 /dev/sda6 swap 4GB
 /dev/sda7 /home 130GB

Network install was almost without problems (the partition configuration had to be edited during the installation, since the installers was offering some foolish configuration). Windowmanager: KDE4. 

== Worked out of the box ==
Wireless, sound (use kmix to get internal mic switched on), ethernet. Video: installed rpm-s from download.nvidia.com, fancy 3d animations of KDE4 work, FramesPerSecond(FPS) measured with glxgears is around 3000.

== Problems ==
There is a strange interplay between the nvidia driver and suspend2ram. Since s2ram was not working with nvidia-rpms, 
I deinstalled them and installed the driver using the script NVIDIA-Linux-x86_64-180.22-pkg2.run (accept to write new {{path|/etc/X11/xorg.conf}} file at the end of install script). FPS is around 12000. Adding
{{bootparm|S2RAM_OPTS|"--force"}} to {{path|/etc/pm/config.d/defaults}} makes s2ram work, however no 3d animations in kde. Adding Composite flag to the {{path|/etc/X11/xorg.conf}} file (by calling {{cmdroot|nvidia-xconfig --composite}}) makes 3d animations work, but s2ram fails. I tried out an older nvidia-driver (NVIDIA-Linux-x86_64-177.82-pkg2.run), too: s2ram ok, 3d animations work, but FPS is only 3000.